Shop All

FinPan

PF109: PreFormed 32" x 32" Shower Pan

PreFormed® Shower Pans are made from high-density polystyrene, ProTEC™ Concrete Backer Board, and a waterproof coating. • 32" x 32"• Waterproof • Install in minutes• Durable and lightweight • Center Drain • Ready...

TISCRW050: 1 1/2" Panhead Screws for TI PROBOARD (50/BOX)

TI-ProScrews are specialty 1 1/2" Deck fastners that has been coated and treated. These screws are the only screw warranted to install TI-ProBoard Underlayment panels. Our TI-ProScrews are designed to be driven through Fiberglass, embedded in treated...

Sioux Chief

CP8212SMQ: Matte Black Cast Square Drain Grate for ClearPath

Our low profile drain grates are the perfect finish for our ClearPath Shower systems. These drain grates are cast from Bronze/Steel and secure with included screws. Clean with mild soap & soft sponge, using abrasives will damage the finish.•...

WaterTite

P461: 6' x 100' Shower Pan Liner

WaterTite® is a 40 mil PVC membrane• 6' x 100' Roll (600 sqft)• May ship in 2 6' x 50' Rolls• Type III air barrier used is tile showers and other concealed waterproofing applications• Lines every 6” to facilitate measuring...

FinPan

UACTP6: Fiberglass Tape - 6" x 200' roll

The 6” wide roll is for exterior concrete backerboard installations.• 6” wide roll is perfect for exterior concrete backerboard installation• 16 x 10 fiberglass mesh-count weave• 6” x 200’ roll each• 14,400 sq...

FinPan

UACTP2: Fiberglass Tape - 2" x 100' roll

The 2” wide roll is specifically designed for sealing joints on interiors. The 6” wide roll is for exterior concrete backerboard installations.• 2” wide roll is specifically designed for sealing joints on interiors• 16 x 10...

WaterArmor

WPM1004: WaterArmor WPM Mixing Valve Seal

WaterArmor WPM Mixing Valve Seal is made from WaterArmor™ Sheet Membrane specially shaped to provide waterproof seals around Mixing Valve-stem(s) with very low memory to reduce seams in the shower.• 4" diameter rubber gasket• Provides 2...

WaterArmor

WPM1003: WaterArmor WPM Pipe Seals (1 pair)

WaterArmor WPM Pipe Seals (1 pair) are made from WaterArmor™ Sheet Membrane specially shaped to provide waterproof seals around hot/cold Valve-stems with very low memory to reduce seams in the shower.• Fits most valve-stems• Provides 3"...

WaterArmor

WaterArmor - 5 Gallon Pail

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• 5 Gallon sized pail• Type III air barrier• Excellent tensile...

WaterArmor

WaterArmor - 1 Gallon

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• Gallon sized pail• Type III air barrier• Excellent tensile...

WaterArmor

WaterArmor - 1 quart

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• Quart sized pail• Type III air barrier• Excellent tensile bond...

TI-ProScrews 1 1/2" Panhead Screws for TI-ProBoard (250/BOX)

TI-ProScrews are specialty 1 1/2" Deck fastners that has been coated and treated. These screws are the only screw warranted to install TI-ProBoard Underlayment panels. Our TI-ProScrews are designed to be driven through Fiberglass, embedded in treated...