TI-ProBoard Accessories

TISCRW050: 1 1/2" Panhead Screws for TI PROBOARD (50/BOX)

TI-ProScrews are specialty 1 1/2" Deck fastners that has been coated and treated. These screws are the only screw warranted to install TI-ProBoard Underlayment panels. Our TI-ProScrews are designed to be driven through Fiberglass, embedded in treated...

ProtectoWrap

PWM100007: Protecto Deck LM Reinforcing Fabric Roll

Protecto LM Reinforcing Fabric fabric is a thin, flexible non-woven fabric designed for use specifically with the Protecto Deck waterproofing system. The waterproofing/anti-fracture fabric adds strength to load-bearing waterproofing membranes...

TISCRW250: TI-ProScrews 1 1/2" Panhead Screws for TI-ProBoard (250/BOX)

TI-ProScrews are specialty 1 1/2" Deck fastners that has been coated and treated. These screws are the only screw warranted to install TI-ProBoard Underlayment panels. Our TI-ProScrews are designed to be driven through Fiberglass, embedded in treated...

TIPROEDGING: 8' Edging Strip for TI ProBoard

TI-ProEdging strips are made from PVC, and designed to embed into the thinset and provide a clean perimeter edge for your tiled deck! They're sold in 8foot long sections. The circled portion (approx. 1 7/8”) is designed to embed into the thinset...

ProtectoWrap

PWM100005: PWC Universal Water Based Primer - 1 Gallon

ProTectoWrap Primer – is a high tack water based primer required on indoor applications. It is either mixed at the jobsite with clean water or used in its full concentrate form, depending on the condition and porosity of the substrate. It is used...

ProtectoWrap

PWM100003: No. 500 Detail Flashing Tape 12" x 600" (1' x 50')

ProtectoWrap Detail Tape – 40 mil unreinforced conformable tape used for detailing inside corners, drains, posts, protrusions or any difficult-to-conform-to area, prior to installing ProtectoWrap Membrane.• 12" x 50' (305 mm x 15 m)•...

ProtectoWrap

PWM100006: Protecto Deck Waterproofing Roll 3' x 50' (150 SF)

ProtectoWrap Waterproofing Membrane incorporates a 2" overlap guide on one side of the sheet for waterproofing. The 2" flood coated lap allows an adhesive-to-adhesive cohesive bond between subsequent sheets of membrane. Once the cohesive bond occurs,...