Shop All

WPM1004: WaterArmor WPM Mixing Valve Seal

WaterArmor WPM Mixing Valve Seal is made from WaterArmor™ Sheet Membrane specially shaped to provide waterproof seals around Mixing Valve-stem(s) with very low memory to reduce seams in the shower.• 4" diameter rubber gasket• Provides 2...

WPM1003: WaterArmor WPM Pipe Seals (1 pair)

WaterArmor WPM Pipe Seals (1 pair) are made from WaterArmor™ Sheet Membrane specially shaped to provide waterproof seals around hot/cold Valve-stems with very low memory to reduce seams in the shower.• Fits most valve-stems• Provides 3"...

WPM1002: WaterArmor WPM Exterior Corners (1 pair)

WaterArmor WPM Exterior Corners (1 pair) are made from WaterArmor™ Sheet Membrane specially shaped to fit exterior corners with very low memory to reduce seams in the shower.• Extends 4" up 2 walls• 3 1/2" overlapping wall/floor...

WPM1001: WaterArmor WPM Interior Corners (1 pair)

WaterArmor WPM Interior Corners (1 pair) are made from WaterArmor™ Sheet Membrane specially shaped to fit interior corners with very low memory to reduce seams in the shower.• Extends 4" up 2 walls• 5" overlapping wall/floor seams•...

WaterArmor - 5 Gallon Pail

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• 5 Gallon sized pail• Type III air barrier• Excellent tensile...

WaterArmor - 1 Gallon

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• Gallon sized pail• Type III air barrier• Excellent tensile...

WaterArmor - 1 quart

WaterArmor™ Liquid Waterproofing is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistance to air and water.• Quart sized pail• Type III air barrier• Excellent tensile bond...

TI-ProScrews 1 1/2" Panhead Screws for TI-ProBoard (250/BOX)

TI-ProScrews are specialty 1 1/2" Deck fastners that has been coated and treated. These screws are the only screw warranted to install TI-ProBoard Underlayment panels. Our TI-ProScrews are designed to be driven through Fiberglass, embedded in treated...

TIPROEDGING: 8' Edging Strip for TI ProBoard

TI-ProEdging strips are made from PVC, and designed to embed into the thinset and provide a clean perimeter edge for your tiled deck! They're sold in 8foot long sections. The circled portion (approx. 1 7/8”) is designed to embed into the thinset...

NS97 Primer

NS97 primer is designed for exterior applications of NAC membranes. This solvent-based primer is non-flammable and may be used in below-grade, on-grade and above-grade applications. The premixed formula requires no thinning and will not re-emulsify. Once...

Detail Seam/Flashing Tape 6"x50' (25sf) - 2 Pack

40 mil unreinforced conformable tape used for detailing inside corners, drains, posts, protrusions or any difficult-to-conform-to area, prior to installing Waterproof Membrane.• 6"x50' (25sf)• Designed to form tight seals in hard to reach...

PRORAMP: 13.5" x 60" ADA Ramp 1:8 Slope for 2" ProPans

Our Pre-Sloped Ramp is made from high-density expanded polystyrene with a waterproof membrane coating. The Pre-Sloped Ramp is a lightweight ready-to-tile ramp to be installed with the ProPan® Pre-Sloped shower pan for ADA compliant showers.•...